Mercury Marine High Performance Engines

Home  About Speedmaster Marine Race Driver Profiles Speedmaster Marine Hours Mercury Marine High Performance Engines Wallpapers and Downloads Catalog Page Contact Us

High Performance Engines

View the latest of Mercury's Racing Division

SST 120 (S2000)

SST 120/S2000 Race

Specifications
Propshaft Rated Horsepower (HP / kW): 180/134
Peak Power @ RPM: 7500
Cylinders: V-6 (60 degree vee)
Displacement (CID/cc): 122/1998
Bore & Stroke (in): 3.125/2.65
Bore & Stroke (mm): 79/67
Fuel Induction System: Carburetor
Ignition System: Capacitor Discharge
Charging System: 16-amp (226-watt) w/voltage regulator
Gear Ratio: 14:15 VI SSM or W/O
Fuel/Oil Ratio: 32:1
Recommended Oil: Mercury Performance Blend 2-Cycle Outboard
Fuel Requirements: 92 Octane Leaded or Unleaded (R+M)/2 (98 RON)
Rotation: Left Hand
Shaft Length (inches): 12
Shaft Length (mm): 305
Weight (lbs / kg): 275/125
Warranty: These products are highly specialized and produced in limited quantities for sale, without warranty, to qualified powerboat racing professionals.
 

Features & Benefits
  • Suitable for both sprint and endurance racing.
  • Lightweight top cowl features hold-down pin for added security.
  • Stock 2.0 Liter (122 CID) powerhead mounted to race center section and race VI SSM gearcase.
  • Heavy-duty crankshaft increases engine durability.
  • Hydraulic up/down cylinder, doubling as the swivel pin for the clamp bracket assembly, allows for fine tuning of trim and handling for optimal performance.
  • Left-hand 14:15 VI SSM racing gearcase with radial discharge water pump for improved cooling.
  • Full range of 4-blade or 5-blade Mercury Racing Lab-Finished Propellers


    •  
     

     

     

    F1

    Champ Race

    Specifications
    Propshaft Rated Horsepower (HP / kW): 290/224
    Peak Power @ RPM: 8600
    Cylinders: V-6 (60 degree vee)
    Displacement (CID/cc): 153/2507
    Bore & Stroke (in): 3.50/2.65
    Bore & Stroke (mm): 89/67
    Fuel Induction System: Electronic Fuel Injection
    Ignition System: Capacitor Discharge
    Charging System: 16-amp (226-watt) w/Voltage Regulator
    Gear Ratio: 15:17 IV SSM or W/O (Optional accessory gearcases and gear ratios are also available)
    Fuel/Oil Ratio: 32:1
    Recommended Oil: Mercury Performance Blend 2-Cycle Outboard
    Fuel Requirements: Race Fuel
    Rotation: Left Hand
    Shaft Length (inches): 12
    Shaft Length (mm): 305
    Weight (lbs / kg): 275/125
    Warranty: These products are highly specialized and produced in limited quantities for sale, without warranty, to qualified powerboat racing professionals.
     

    Features & Benefits
  • Suitable for both sprint and endurance racing.
  • Lightweight top and bottom cowls.
  • Custom 290 horsepower 2.5 Liter V-6 powerhead for maximum performance.
  • An advanced digital fuel injection system features six individual injectors that feed fuel through multiple carbon fiber reeds for optimum acceleration and top-end speed.
  • New piston and ring package provides better durability and less friction.
  • Hydraulic up/down cylinder, doubling as the swivel pin for the clamp bracket assembly, allows for fine tuning of trim and handling.
  • Full range of 4-blade or 5-blade Mercury Racing Lab-Finished" Cleaver propellers available.


    •  
     

     

    2.5 Drag

    2.5 EFI Drag Race

    Specifications
    Propshaft Rated Horsepower (HP / kW): 300 (224 kW)
    Peak Power @ RPM: 9000
    Cylinders: V-6 (60 degree vee)
    Displacement (CID/cc): 153/2507
    Bore & Stroke (in): 3.50/2.65
    Bore & Stroke (mm): 89/67
    Fuel Induction System: Electronic Fuel Injection - Brucato SVS Intake
    Ignition System: Capacitor Discharge
    Charging System: 16 amp (256 watt) w/Voltage Regulator
    Gear Ratio: 1.87:1 SM (Also sold without a gearcase; optional accessory gearcases and gear ratios are available.)
    Fuel/Oil Ratio: 32:1
    Recommended Oil: Mercury Performance Blend 2-Cycle Outboard
    Fuel Requirements: Race Fuel
    Rotation: Right Hand
    Shaft Length (inches): 15
    Shaft Length (mm): 381
    Weight (lbs / kg): 375/170
    Warranty: These products are highly specialized and produced in limited quantities for sale, without warranty, to qualified powerboat racing professionals.

     

    Features & Benefits
  • Blueprinted 2.5 Liter V6 powerhead delivers 300 hp at 9,000 RPM.
  • Four-bolt center main cylinder block/crankcase enhances torque retention, improving the stability of the crankshaft and reduces bearing wear.
  • Digital electronic ignition system.
  • The dual stage seven-petal intake system, fed by a digital ECU box and six individual fuel injectors, ensures quick starting and optimal engine performance throughout the 9000 RPM operating range.
  • The 15 " (381 mm) short shaft center section lowers the engine's center of gravity, improving overall boat performance. A two-inch setback, incorporated into the heavy-duty swivel bracket assembly, adjusts the running angle of the boat, using less trim.
  • Sport Master gearcase feature a heavy-duty propshaft for enhanced durability.

    •  

    Offshore Race 2.5

    2.5 EFI Offshore Race

    Specifications
    Propshaft Rated Horsepower (HP / kW): 280 (209 kW)
    Peak Power @ RPM: 8000
    Cylinders: V-6 (60 degree vee)
    Displacement (CID/cc): 153/2507
    Bore & Stroke (in): 3.50/2.65
    Bore & Stroke (mm): 89/67
    Fuel Induction System: Electronic Fuel Injection
    Ignition System: Inductive Coils w/Computer Control
    Charging System: 60-amp (756-watt) w/dual Voltage Regulator
    Gear Ratio: 1.87:1 (SM)
    Fuel/Oil Ratio: 32:1
    Recommended Oil: Mercury Performance Blend 2-Cycle Outboard
    Fuel Requirements: 92 Octane Leaded or Unleaded (R+M)/2 (98 RON)
    Rotation: Left or Right Hand
    Shaft Length (inches): 15 or 20
    Shaft Length (mm): 381 or 508
    Weight (lbs / kg): 401/182 (15"); 412/187 (20")
    Warranty: These products are highly specialized and produced in limited quantities for sale, without warranty, to qualified powerboat racing professionals.
     

    Features & Benefits
  • Available with 15" (381 mm) or 20" (508 mm) heavy-duty center sections.
  • Heavy-duty power trim system.
  • Lightweight top and bottom cowls.
  • Solid upper and lower engine mounts enhance handling and overall boat performance.
  • Sport Master gearcase with 1.87:1 gear ratio features a heavy-duty housing and internal components designed to withstand stresses encountered with higher transom heights and speeds.
  • Full range of 3-blade or 4-blade Mercury Racing Lab-Finished Propellers

    •  

    S3000

    S3000

    Propshaft-rated Horsepower 300 (224kw)
    Peak Horsepower @ RPM: 9000
    Cylinders: V-6 (60 degreevee)
    Displacement: 153 cu. in. (2507cc)
    Bore (in/mm): 3.50/89
    Stroke (in/mm): 2.65/67
    Induction System: Electronic Fuel Injection
    Ignition: Capacitor Discharge
    Alternator System: 16-amp (226-watt) w/Voltage Regulator
    Gear Ratio: *14:15 VI SSM and 15:17 IV SSM gearcases are available as accessories.
    Fuel/Oil Ratio: 32:1
    Recommended Oil: Performance Blend 2-Cycle Outboard